Chevrolet 2004 Blazer Specifications download pdf (Page 91)

100

101

Automatic Transfer Case

If your vehicle is equipped

with four-wheel drive, the

transfer case knob is

located to the right of the

steering wheel on the

instrument panel. Use this

knob to shift into and

out of four-wheel drive.

2HI (Two-Wheel High): This setting is for driving in

most street and highway situations. Your front axle is not

engaged in two-wheel drive. It also provides the best

fuel economy.

A4WD (Automatic Four-Wheel Drive): This setting is

ideal for use when road conditions are variable.

When driving your vehicle in A4WD, the front axle is

engaged, but the vehicle’s power is sent to the

rear wheels. When the vehicle senses a loss of traction,

the system will automatically engage four-wheel

drive. Driving in this mode results in slightly lower fuel

economy than 2HI.

4HI (Four-Wheel High): Use 4HI when you need extra

traction, such as on snowy or icy roads or in most

off-road situations. This setting also engages your front

axle to help drive your vehicle.

4LO (Four-Wheel Low): This setting also engages

your front axle and delivers extra torque. It sends

maximum power to all four wheels. You might choose

4LO if you are driving off-road in deep sand, deep mud,

and climbing or descending steep hills.

{CAUTION:

Shifting the transfer case to NEUTRAL can

cause your vehicle to roll even if the

transmission is in PARK (P). You or someone

else could be seriously injured. Be sure to set

the parking brake before placing the transfer

case in NEUTRAL. See Parking Brake on

page 2-28.

NEUTRAL: Shift the vehicle’s transfer case to

NEUTRAL only when towing your vehicle. See

Recreational Vehicle Towing on page 4-44 for more

information.

2-25

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 449 450

Comments to this Manuals

No comments

Chevrolet 2004 Blazer Specifications Page 91

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet 2004 Blazer