Chevrolet SSR 2004 Installation Manual download pdf (Page 2)

INSTALLATION MANUAL

Magna Charger

Radix Intercooled Supercharger System

GM 4.8, 5.3 & 6.0 liter engines

We encourage you to read this manual thoroughly before you begin work, for a few reasons:

A quick parts check to make certain your kit is complete (See shipper parts list in this manual). If you

discover shipping damage or shortage, please call our office immediately.

Take a look at exactly what you are going to need in terms of tools, time, and experience.

Review our limited warranty with care.

Make sure to have 91 or higher octane fuel in the tank.

When unpacking the supercharger kit lift the supercharger assembly by the black plastic

bypass actuator. This is from the factory and can be altered if used as a lifting point!

DO NOT

pre-set

Tools Required

! Safety glasses

Metric wrench set

1/4” drill bit

1/4”, 3/8”, & 1/2” drive metric socket set ( standard and deep )

8mm hex (Allen) wrench

3/8” and 1/2” drive foot pound and inch pound torque wrenches

Belt tensioner wrench or 1/2” breaker bar

7/32” socket

Drill and 5/16” drill bit

Phillips and flat head screwdrivers

Fuel quick disconnect tools (included in kit)

E5 internal Torx socket

Small or angled 3/8” drill motor

Drain pan

Compressed air

7/12

Page 2

2003-2004 Chevy SSR Supercharger Installation Instructions

magnacharger.com

1 2 3 4 5 6 7 ... 55 56

No comments

Chevrolet SSR 2004 Installation Manual Page 2