
Unlocking
the Theft-Deterrent Feature After
a
Power
Loss
Enter
your
secret code as follows; pause
no
more
than
15
seconds between steps:
1.
LOC
appears when the ignition is on.
2. Press MN and
000
will
appear
on
the display.
3.
Press MN again
to
make the last two digits agree
with your code.
4.
Press
HR
to make the first one or two digits agree
with
your
code.
5.
Press AM-FM after you have confirmed that the
code matches the secret code you have written down.
The display will show
SEC,
indicating the radio
is
now operable and secure.
If
you
enter the wrong code eight times,
INOP
will
appear
on
the display.
You
will have to wait an hour
with the ignition on before you can try again. When you
try
again, you will only have three chances to enter the
correct code before INOP appears.
If you lose
or
forget your code, contact your dealer.
Disabling the Theft-Deterrent Feature
1.
Turn the ignition
to
ACCESSORY or
RUN.
2.
Turn
the radio
off.
3.
Press the
1
and
4
buttons together. Hold them down
4.
Press MN and
000
will appear
on
the display.
until
SEC
shows on
the
display.
5.
Press MN again to make the last two digits agree
with your code.
6.
Press
HR
to make the first one or two digits agree
with your code.
7.
Press AM-FM after you have confirmed that the
code matches the secret code you
have
written down.
The display will show
---,
indicating that the radio is
no longer secured.
If the code entered is incorrect,
SEC
will appear on the
display. The radio will remain secured until the correct
code is entered.
When battery power is removed and later applied to a
secured radio, the radio won’t turn on and
LOC
will
appear on the display.
To
unlock a secured radio, see “Unlocking the
Theft-Deterrent Feature After
a
Power
Loss”
earlier in
this section.
Enter
your
secret code as follows; pause no more than
15
seconds between steps:
3-22
Comments to this Manuals