3.4L
L32
(Code
S)
Then, without shutting
off
the engine,
follow these
steps:
1. Pull out the dipstick and wipe it with a
clean rag or paper towel.
5.7L
LT1
(Code
P)
2.
Push
it
back
in
all the way, wait three
seconds and then pull
it
back out
again.
3.
Check both sides
of
the dipstick, and
read the lower level. The fluid level
must be
in
the “COLD’ area for a cold
check or
in
the
“HOT”
area or
cross-hatched area for a hot check.
4.
If
the fluid level is
in
the acceptable
range, push the dipstick back
in
all the
way.
How
to
Add Fluid:
Refer to the Maintenance Schedule to
determine what kind of transmission fluid
to use. See “Recommended Fluids and
Lubricants” in the Index.
195
...
Comments to this Manuals