Chevrolet SSR 2004 Installation Manual download pdf (Page 38)

1 . Here is the intercooler pump,

mounting clamp, hardware, wiring and

reservoir to hose.

pump

140. From underneath the vehicle on the

right side locate the elongated hole.

Approximately 1” back from the hole drill a

1/4” hole to mount the pump. Place the

mounting clamp around the pump body and

then pass the new 6 x 20mm bolt through

the pump mounting clamp and then through

the hole. Secure the bolt with the new nut

and tighten securely with a 10mm wrench.

Pump

1 . The intercooler pump will mount in the

engine compartment next

to the battery cable junction box. Note he

elongated hole in the panel.

right side of the

Junction box

Pump

Hole

Mounting bolt

and clamp

137. Removing the molded foam block

creates a opening between the radiator and

the fender well for the intercooler coolant

lines to pass. The line from the pump to the

heat exchanger and from the heat

exchanger to the coolant manifold will pass

through this opening.

Intercooler lines

pass through here

7/12

Page 38

2003-2004 Chevy SSR Supercharger Installation Instructions

magnacharger.com

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

No comments

Chevrolet SSR 2004 Installation Manual Page 38