21. Remove the engine cover completely,
as it and the SSR badge will not be reused.
23. Unplug the Mass Air Flow meter (MAF)
connector by pulling out the gray release
trigger and the squeezing the connector.
24. Remove the two plastic push-lock
rivets from the air filter apron. Do this by
gently prying the center of the rivet up with
a straight blade screwdriver and then
removing the rivets completely.
22. Loosen the air filter bellows clamp and
the Mass Air Flow meter (MAF) clamp with
a 8mm nut driver.
MAF
Clamp
Page 9
2003-2004 Chevy SSR Supercharger Installation Instructions
Comments to this Manuals