Chevrolet 2006 Tahoe Specifications download pdf (Page 123)

100

101

6. Simultaneously press and hold the Two-Wheel High

and Four-Wheel Low buttons for 10 seconds. The

NEUTRAL light will come on when the transfer case

shift to NEUTRAL is complete.

7. If the engine is running, verify that the transmission

is in NEUTRAL (N) by shifting the transmission to

REVERSE (R) for one second, then shift the

transmission to DRIVE (D) for one second.

8. Turn the ignition to ACCESSORY, which will turn

the engine off.

9. Place the transmission shift lever in PARK (P).

10. Turn the ignition to LOCK.

Shifting Out of NEUTRAL

To shift out of NEUTRAL do the following:

1. Set the parking brake and apply the regular

brake pedal.

2. Shift the transmission to NEUTRAL (N) and turn the

ignition to RUN with the engine off.

3. Press the button for the desired transfer case shift

position (Two-Wheel High, Four-Wheel High, AUTO

4WD, or Four-Wheel Low).

After the transfer case has shifted out of NEUTRAL

the NEUTRAL light will go out.

4. Release the parking brake.

Notice: Shifting the transmission into gear before

the Four-Wheel Low indicator light has stopped

ﬂashing could damage the transfer case. To

help avoid damaging your vehicle, always wait for

the Four-Wheel Low indicator light to stop ﬂashing

before shifting the transmission into gear.

5. Start the engine and shift the transmission to the

desired position.

Excessively shifting the transfer case into or out of the

different modes may cause the transfer case to enter the

shift protection mode. This will protect the transfer case

from possible damage and will only allow the transfer

case to respond to one shift per 10 seconds. The transfer

case may stay in this mode for up to three minutes.

2-31

1 ... 122 123 124 ... 536

Comments to this Manuals

No comments

Chevrolet 2006 Tahoe Specifications Page 123

Comments to this Manuals

Related products and manuals for Cars Chevrolet 2006 Tahoe