Chevrolet 2006 Tahoe Specifications download pdf (Page 28)

100

101

Installing the Bench Seat

{CAUTION:

A safety belt that is improperly routed, not

properly attached, or twisted will not provide

the protection needed in a crash. The person

wearing the belt could be seriously injured.

After raising the rear seatback, always check

to be sure that the safety belts are properly

routed and attached, and are not twisted.

To install the seat, do the following:

1. Open the liftgate to access the rear of the vehicle.

2. While holding the rear of the seat up, slide the

front wheels into the slots on the ﬂoor. The front

latches should lock into place. If the latches do not

lock, try tilting the rear of the seat upward.

3. Once the latches are engaged, let the seat drop

into place.

{CAUTION:

A seat that is not locked into place properly

can move around in a collision or sudden stop.

People in the vehicle could be injured. Be sure

to lock the seat into place properly when

installing it.

4. Push and pull on the seat to make sure it is locked

into place. The seatback cannot be raised to the

upright position unless the seat is secured to

the ﬂoor.

5. Release the lever labeled 1, located on the rear of

the seat, and pull the seatback up to return it to the

upright position.

1-22

1 ... 27 28 29 ... 536

Comments to this Manuals

No comments

Chevrolet 2006 Tahoe Specifications Page 28

Comments to this Manuals

Related products and manuals for Cars Chevrolet 2006 Tahoe