Chevrolet 2006 Tahoe Specifications Page 414

  • Download
  • Add to my manuals
  • Print
  • Page
    / 536
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 413
Notice: If the jumper cables are connected or
removed in the wrong order, electrical shorting may
occur and damage the vehicle. The repairs would not
be covered by your warranty. Always connect and
remove the jumper cables in the correct order,
making sure that the cables do not touch each
other or other metal.
A. Heavy, Unpainted Metal Engine Part or Remote
Negative () Terminal
B. Good Battery or Remote Positive (+) and Remote
Negative () Terminals
C. Dead Battery or Remote Positive (+) Terminal
To disconnect the jumper cables from both vehicles do
the following:
1. Disconnect the black negative () cable from the
vehicle that had the bad battery.
2. Disconnect the black negative () cable from the
vehicle with the good battery.
3. Disconnect the red positive (+) cable from the
vehicle with the good battery.
4. Disconnect the red positive (+) cable from the other
vehicle.
5. Return the remote positive (+) terminal cover, if
equipped, to its original position.
Jumper Cable Removal
5-46
Page view 413
1 ... 413 414 415 ... 536

Comments to this Manuals

No comments