Chevrolet 2006 Tahoe Specifications download pdf (Page 421)

100

101

To replace a front turn signal, sidemarker or DRL bulb,

do the following:

1. Open the hood. See Hood Release on page 5-11

for more information.

2. Remove the headlamp assembly as described

previously. See Headlamps on page 5-51 for

more information.

3. Press the retainer clip (B), located behind the turn

signal assembly, towards the outside of the vehicle.

4. Pull the turn signal assembly out of the vehicle.

5. Press the locking release lever, turn the bulb socket

counterclockwise and remove it from the turn signal

assembly.

6. Remove the old bulb from the bulb socket.

7. Install a new bulb into the bulb socket.

8. Insert the bulb socket into the turn signal assembly

and turn it clockwise until it locks.

9. Reinstall the turn signal assembly back into the

vehicle placing the hook and posts on the inner side

into the alignment holes ﬁrst, then the outer side into

the retainer bracket until you hear a click.

10. Reinstall the headlamp assembly.

5-53

1 ... 420 421 422 ... 536

Comments to this Manuals

No comments

Chevrolet 2006 Tahoe Specifications Page 421

Comments to this Manuals

Related products and manuals for Cars Chevrolet 2006 Tahoe